| MODEL | MP-981 | |
| Detection method | Hall element | |
| Measurement range | 1Hz ~ 20kHz (using a 60P/R gear, 1~20,000 r/min, | |
| with an output waveform duty cycle is 50% ±20%) | ||
| Detection gear | Strong magnetic materials | |
| (modulus 0.5~3, tooth width 3mm or greater) | ||
| Power supply used | DC 12V±2V (0.5Vp-p or less ripple) | |
| Current consumption | 40mA or less (12V, at 25℃) | |
| Output waveform | Low level; +0.5 ro less, High level;5V±0.5V | |
| rectangular wave form (with no load) | ||
| Output impedance | Approx. 330Ω | |
| Output type | Floating groung | |
| Protective circuit | Power supply polarity and output short protection | |
| Operating temperature range | -10℃ ~ 70℃ | |
| Matching connector | 6-pin connector (type R04-PB6F plug) | |
| Allowable vibration (during operation) | double-ended 1.2mm at 30Hz in X, Y, | |
| and Z direction for one hour each | ||
| Allowable shock (non-operating) | 490m/s² in X and Y direction each 3 times. | |
| Withstand voltage | 1. DC250V, 1min. (between shield and signal cable) | |
| 2. DC250V, 1min. (between shield and sensor head) | ||
| weight | Approx. 80g (including two mounting nuts) | |
The person in charge
Dae Young JungAddress
20, Daegu, Dalseo-gu (42709)Please enter the text on the left image to prevent automatic input.
0 / 4000
SILVER